Gangway Hinge

Make it easy to install/remove your pole anchors with the Pole Auger (one per pole). Attach the auger to the bottom of the pole with bolt, slip a Pole Connector over the top of the pole and attach to dock. Drill a hole through the top of the pole, insert a dowel (not included) and turn to auger the pole into the lake bed. Remove pole by turning the dowel in the opposite direction. (Hardware included)
Anchor your dock without poles. Slip the long end of the Dead Man Collar in the Pole Connector on the side of the dock and rig a weighted chain through the bottom of the collar. Fasten the chain by setting a link in the groove in the top of the collar. (Chain and weight not included)
10" (25.4 cm)
12" (30.48 cm)
14" (35.56 cm)
16" (40.64 cm)
18" (45.72 cm)
Attach your floating dock to a permanent structure with the Piling Loop. Bolt the bracket to the deck of the dock, loop the support around the piling (up to 18" (45.72 cm) in diameter) and connect back to the bracket. Great for fluctuating water levels. (Hardware included)